PRIMER EMULSION (EG)

USAGE:
PRIMER EMULSION (EG) is a ready-to-use, fine-particle, deep-penetrating preparation based on high-quality acrylic resins. It is intended for priming and strengthening all absorbent, excessively absorbent, and weakened mineral substrates, including concrete, screeds (cement, anhydrite, gypsum), plasterboard, all types of plasters (cement, gypsum, etc.), and wall materials made of bricks or blocks (ceramic, silicate, or aerated concrete).

APPLICATION METHOD:
PRIMER EMULSION (EG) should ideally be applied to the substrate undiluted, using a roller or brush in a single, thin, and even layer. For very absorbent and weak substrates, the first priming can be done with the emulsion diluted with clean water in a 1:1 ratio. After the first layer has dried, repeat the priming with undiluted emulsion. The surface should not be used earlier than 12 hours after applying the final layer of emulsion. During application, the substrate and ambient temperature should be between +5°C and +35°C. Clean tools with clean water after finishing the work.

APPLICATION RATE:
0.2 – 0.3 kg/m²

PACKAGING:
5kg, 18kg